Village:Seidenstrasse
Website | |
---|---|
Description | A pneumatic tube system built from non-perforated (airtight) drainage pipe and vacuum cleaners. Being an Open Artwork, Seidenstrasse is a revision of the OCTO installation by the artist group Telekommunisten (http://telekommunisten.net/octo/, 2013). Features include decentralized mesh-style, push-preferred network with endpoints (no vacuum cleaners) and nodes (push-forward / pull on request).
Seidenstrasse has been at 30C3 and 31c3 This Years new Features: TBD |
Members | Jdew, Luc |
Projects | create project |
Self-organized Sessions | create self-organized session |
Tags | seidenstrasse |
Registered on | |
Location for self-organized sessions | No |
Other villages by tags... | |
Location | 145.94051, 146.81809 |
A pneumatic tube system built from non-perforated (airtight) drainage pipe and vacuum cleaners. Being an Open Artwork, Seidenstrasse is a revision of the OCTO installation by the artist group Telekommunisten (http://telekommunisten.net/octo/, 2013). Features include decentralized mesh-style, push-preferred network with endpoints (no vacuum cleaners) and nodes (push-forward / pull on request). Seidenstrasse has been at 30C3 and 31c3 This Years new Features: TBD
Contents
How to make your own capsule
ALL Capsules need to be certified BEFORE use in the system, for certification call 4451 or 4452 or TBD
Everyone who wants to participate should build their own capsules. Please post your pictures, drawings, instructions and experiences here as inspiration for others.
Important: Capsules without light will not be allowed in the system! Attach at least one LED to each capsule, so stuck capsules are visible. No exceptions!
Tube dimensions (verified by measurement): Outside diameter: 100 mm Inside diameter (the tube is corrugated): 90-92mm
Capsule properties (verified by experiment):
min | max | optimal? | comment | |
---|---|---|---|---|
Diameter | 75mm | 90mm | 85mm | also depends on capsule's sides, if soft, thicker may be better |
Length | 100mm | 220mm | 180mm | too short might cause it to turn and get stuck, too long will not get around corners. (rounded and narrowed ends can be longer) |
Weight | -10t | 550g | 250g | large weights need to be tested more on long tubes going up |
The ends of the capsule should be round or narrowed, so it can easily glide around bends. Take a look at how commercial capsules look like for inspiration: http://commons.wikimedia.org/wiki/File:Rohrpostbuechse.jpg
Do NOT buy commercial capsules. They won't fit!
A capsule made by cutting a ring out of a 85mm 1.5l PET water bottle and putting the ends back together worked really well in experiments (see picture below).
At the largest diameter a ring of felt or the soft side of velcro should be applied to ease the gliding through the pipes and provide a better airtight seal between tube wall and capsule.
Capsule Ideas: Multicolor glowing capsules, capsules with e-paper displays, encrypted capsules (with puzzles or locks).
3D Files
- On Thingiverse.com by obelix
- On Thingiverse.com by zeus
- [1] by protofALk
Video
Short trip through Seidenstraße.