Here you can make your own buttons from bottle caps. You can attach them either with a metal tab from a drinks can and a safety pin or with hot glue and a safety pin.

You can either stick things onto the buttons or paint them on site with our pens.

You can take everything you make yourself home with you or give it away as a gift.

Simple instructions without a metal tab:

1. Remove the plastic layer from the bottle cap. You can do this with a screwdriver or pliers, for example.
2. Use the pliers to fold down the sides of the bottle cap so that they are as flat as possible.
3. Attach a safety pin to the back with hot glue (the opening should be at the top).
4. Paint or decorate.
5. Party and you're done!

Simple instructions with metal tab:

1. Open the safety pin and insert it through the metal tab.
2. Place both on the underside of the bottle cap and fold down the sides of the bottle cap. The metal tab must be held in place so that it cannot be removed. The safety pin must still be able to be opened.
3. Paint or decorate.
4. Party and you're done!