Creating Z-Wave controllers and devices
Event start: 11 months, 4 weeks ago // Event Information
![Creating Z-Wave controllers and devices Creating Z-Wave controllers and devices](/camp/2023/hub/static/plainui/img/hub-assembly-event-06.png)
- Typ
- Selforganized Session
- Time
- Aug. 18, 2023, 4 p.m. - Aug. 18, 2023, 5:30 p.m.
- Speakers
- PoltoS
- Language
- EN, FR, RU
- Room
- -
- Host
- Self Organized Sessions
Hacking around Z-Wave smart home gateway based on Raspberry Pi and making your own Z-Wave device based on Z-Uno.
Location: Lemanicus Village (https://map.events.ccc.de/camp/2023/map/#20/53.0324/13.3065)
(this session is the same as on the 16th of Aug)
Please take with you:
- Your laptop with
- Access to the internet
- Arduino IDE or VS code installed
- Z-Uno package installed in Arduino IDE (see https://z-uno.z-wave.me/install for details - we will help you with this during the workshop)
- Your Raspberry Pi 3/4 with Raspbian OS (optional)
- Arduino-compatible sensors to build your own Z-Wave sensor (optional)
- Your Z-Wave stuff if any (optional)
Workshop sections 🔗
- What is Z-Wave and where should you use it
- Z-Way controller and RaZberry/WB7 hardware: Controlling switches, Reading sensor/switch values, Making rules, Using JS API
- Z-Uno prototyping board: Making Simple Switch, Adding more stuff
- Z-Uno Shield and Z-Uno Configurator
- Z-Uno Modules
Usefull links for the workshop 🔗
Z-Way controllers on the workshop 🔗
Controller (EU, 868 MHz)
- Smart Home UI http://192.168.88.22:8083
- Expert UI http://192.168.88.22:8083/expert
- WiFi SSID: Z-Wave-RPi-xxxx / PSK: ccc-2023
- Smart Home User: admin / Password: ccc
Z-Way documentation 🔗
- Installing Z-Way https://z-wave.me/z-way/download-z-way/
- Z-Way doc https://z-wave.me/manual/z-way
- Z-Way JS engine GitHub https://github.com/Z-Wave-Me/home-automation/
Z-Way workshop materials 🔗
- Making rules: Settings -> Apps -> Local -> IfThen -> Add
- Turning on/off a device /ZWaveAPI/Run/devices[NNN].SwitchBinary.Set(0 or 1)
- Reading switch value /ZWaveAPI/Run/devices[NNN].SwitchBinary.data.level.value
- Reading sensor value /ZWaveAPI/Run/devices[NNN].SensorBinary.data[12].level.value
- Using JS API /JS/Run/var v = 1; setInterval(function() { zway.devices[NNN].SwitchBinary.Set(v); v = 1-v;}, 2000);
Z-Uno documentation 🔗
- Quick Intro https://z-uno.z-wave.me/getting-started/quick-introduction-in-z-uno/
- Installation howto https://z-uno.z-wave.me/install
- Language Reference https://z-uno.z-wave.me/reference/
- Examples https://z-uno.z-wave.me/examples/
- Z-Uno Shield https://z-uno.z-wave.me/shield/
- Z-Uno Shield Configurator https://z-uno.z-wave.me/shield/configurator/
- Z-Uno GitHub https://github.com/Z-Wave-Me/Z-Uno-Core/
Z-Uno settings 🔗
Make sure to configure in Arduino IDE:
- File -> Preferences -> Add package source URL http://z-uno.z-wave.me/files/z-uno/package_z-wave.me_index.json
- Tools -> Board -> Board Manager -> Z-Uno 2.1.5
- Tools -> Board -> Z-Uno
- Tools -> Programmer -> Z-Uno
- Tools -> Port -> /dev/ttyUSB0 or /dev/ttyUSB1
- Tools -> Frequency EU/RU (depending on your controller)
- Tools -> Security none or S0 or S2 - up to you
You might also need to add your user to dialout group to have permissions for /dev/ttyUSB*
Z-Uno workshop materials 🔗
Sketch for Simple Switch:
ZUNO_SETUP_CHANNELS(ZUNO_SWITCH_BINARY(state, 0));
byte state = 0;
void setup() {
pinMode(13, OUTPUT);
}
void loop() {
digitalWrite(13, state ? HIGH : LOW);
}
Sketch in getter/setter style:
ZUNO_SETUP_CHANNELS(
ZUNO_SWITCH_BINARY(getter, setter),
ZUNO_SENSOR_BINARY_DOOR_WINDOW(doorGetter)
);
byte state = 0;
byte door = 0, lastDoor = 0xff;
void setup() {
pinMode(13, OUTPUT);
pinMode(18, INPUT);
}
void loop() {
digitalWrite(13, state ? HIGH : LOW);
door = digitalRead(18) == LOW ? 0xff : 0;
if (door != lastDoor) zunoSendReport(2); // push update of channel 2
lastDoor = door;
}
void setter(byte val) {
state = val;
}
byte getter() {
return state;
}
byte doorGetter() {
return door;
}