|Description||Long yellow tubes with air flowing thru it|
|Persons working on||Clarity, Gunther, Jdew, KampfCaspar|
|Located at assembly||Seidenstrasse|
After outstanding success of *Silkroad* (ger. "Seidenstrasse") at 30C3, 31C3, Camp15 and 32C3, the project will return with *Silkroad V5* at 33c3. This year, we'll not only do a star topology with no vaccuum cleaners at the nodes. Every Station got a Numpad for entering the destination nodes ID. The route will be figured out automatically and then off it goes. If this fails station has its own field telephone for announcing capsules, it'll be pulled by a vaccuum cleaner at the central node.
We are current plan includes 2 switching nodes located in the hackcenter and at the first floor (below Hall 1). Multiple exit nodes will be located at the hackcenter for different assemblys (interested? send us a mail!), you can also find exit nodes at "Foyer Hall 1" and "Foyer Hall 2". All switching and exit nodes are capable of sending and recieving capsules to every other station.
In years where net neutrality is important, we had to follow our competitors and provide you some "special services" on our "Datenautobahn". More information later.
There are two types of nodes: switching nodes and exit nodes.
Switching nodes are points where multiple pipes arrive and where people feel like performing the switching functions. Feel free to visit us and help us switching packets (you'll find us, just follow the yellow tubes!).
Exit nodes can be at any place in the building and can be used to send and recieve capsules. We'll provide you information howto send capsules at every station.
Enter "B" to set the location and then the destination-ID. Enter # to send it to it's destination.
Destionation Node IDs
|Seidenstraße / Silkroad.onion||01|
|Eingang / Entrance||03|
Silkroad V5 RC1:
Each exit node is adressed by its switching node designation plus its pipe number. Each switching node handles its pipe numbering as it sees fit. Re-numbering is strongly discouraged, if pipes fail or are shut down, just leave its number dormant.
The basic adressing scheme consists of the Switch Node Number followed by a : and the Endpoint Pipe Number at this node. e.g. 23: 42 (meaning: switching node No. 23, Endpoint No. 42). A barcode representation of the basic adressing scheme should be developed. Additionally, memorable naming is allowed, at least if the switching node is operated by humans.
Apparently buildup is starting at ~19.12
If you want to help building the Seidenstrasse, do not hastitate to contact us. Try #seidenstrasse on irc.hackint.org or our Mailinglist seidenstrasse AT lists.chaos-inkl.de
How to make your own capsule
Everyone who wants to participate should build their own capsules. Please post your pictures, drawings, instructions and experiences here as inspiration for others.
Important: Capsules without light will not be allowed in the system! Attach at least one LED to each capsule, so stuck capsules are visible. No exceptions!
Tube dimensions (verified by measurement): Outside diameter: 100 mm Inside diameter (the tube is corrugated): 90-92mm
Capsule properties (verified by experiment):
|Diameter||75mm||90mm||85mm||also depends on capsule's sides, if soft, thicker may be better|
|Length||100mm||220mm||180mm||too short might cause it to turn and get stuck, too long will not get around corners. (rounded and narrowed ends can be longer)|
|Weight||-10t||550g||250g||large weights need to be tested more on long tubes going up|
The ends of the capsule should be round or narrowed, so it can easily glide around bends. Take a look at how commercial capsules look like for inspiration: http://commons.wikimedia.org/wiki/File:Rohrpostbuechse.jpg
Do NOT buy commercial capsules. They won't fit!
A capsule made by cutting a ring out of a 85mm 1.5l PET water bottle and putting the ends back together worked really well in experiments (see picture below).
At the largest diameter a ring of felt or the soft side of velcro should be applied to ease the gliding through the pipes and provide a better airtight seal between tube wall and capsule.
Capsule Ideas: Multicolor glowing capsules, capsules with e-paper displays, encrypted capsules (with puzzles or locks).
-  by protofALk
-  by LongHairedHacker
How to send a capsule
All Capsules have to be certified with an C5 Certificate (for Capsule Certification call: TBA)
First, write the receiving address on the capsule (optional: return address) or use our address stickers: LINK TBD. Then bring your capsule to the nearest exit node, put your capsule in and call the nearest switching node with the phone provided at the node.